show logging system
CF-702
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show logging system
To display the System Event Archive (SEA) logging system disk, use the show logging system
command in privileged EXEC mode.
show logging system [disk | size]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Usage Guidelines The show logging system command displays the latest messages first.
Examples The following example shows how to display the latest system log messages:
Router# show logging system
SEQ: MM/DD/YY HH:MM:SS MOD/SUB: SEV, COMP, MESSAGE
=====================================================
1: 01/24/07 15:38:40 6/-1 : MAJ, GOLD, syndiagSyncPinnacle failed in slot 6
2: 01/24/07 15:38:40 6/-1 : MAJ, GOLD, queryHyperionSynched[6]: Hyperion out of sync in
sw_mode 1
3: 01/24/07 15:38:40 6/-1 : MAJ, GOLD, queryHyperionSynched[6]: Hyperion out of sync in
sw_mode 1
4: 01/24/07 15:38:40 6/-1 : MAJ, GOLD, queryHyperionSynched[6]: Hyperion out of sync in
sw_mode 1
5: 01/24/07 15:38:40 6/-1 : MAJ, GOLD, queryHyperionSynched[6]: Hyperion out of sync in
sw_mode 1
6: 01/24/07 15:38:40 6/-1 : MAJ, GOLD, queryHyperionSynched[6]: Hyperion out of sync in
sw_mode 1
7: 01/24/07 15:38:39 6/-1 : MAJ, GOLD, queryHyperionSynched[6]: Hyperion out of sync in
sw_mode 1
The following example shows how to display the SEA logging system disk:
Router# show logging system disk
SEA log disk: sup-bootdisk:
The following example shows how to display the current size of the SEA:
Router# show logging system size
SEA log size: 33554432 bytes
Table 95 describes the significant fields shown in the display.
disk (Optional) Displays the location of the SEA logging system disk.
size (Optional) Displays the current size of the SEA.
