show sup-bootflash
CF-897
Cisco IOS Configuration Fundamentals Command Reference
July 2008
show sup-bootflash
To display information about the sup-bootflash file system, use the show sup-bootflash command in
privileged EXEC mode.
show sup-bootflash [all | chips | filesys]
Syntax Description
Defaults This command has no default settings.
Command Modes Privileged EXEC
Command History
Examples This example shows how to display a summary of bootflash information:
Router# show sup-bootflash
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. image EBC8FC4D A7487C 6 10700796 Nov 19 1999 07:07:37 halley
2 .. unknown C7EB077D EE2620 25 4644130 Nov 19 1999 07:50:44 cat6000-sup_
5-3-3-CSX.bin
645600 bytes available (15345184 bytes used)
Router#
This example shows how to display all bootflash information:
Router# show sup-bootflash all
-#- ED --type-- --crc--- -seek-- nlen -length- -----date/time------ name
1 .. image EBC8FC4D A7487C 6 10700796 Nov 19 1999 07:07:37 halley
2 .. unknown C7EB077D EE2620 25 4644130 Nov 19 1999 07:50:44 cat6000-sup_
5-3-3-CSX.bin
645600 bytes available (15345184 bytes used)
-------- F I L E S Y S T E M S T A T U S --------
Device Number = 2
DEVICE INFO BLOCK: bootflash
Magic Number = 6887635 File System Vers = 10000 (1.0)
all (Optional) Displays all possible Flash information.
chips (Optional) Displays information about the Flash chip.
filesys (Optional) Displays information about the file system.
Release Modification
12.2(14)SX Support for this command was introduced on the Supervisor Engine 720.
12.2(17d)SXB Support for this command on the Supervisor Engine 2 was extended to
Release 12.2(17d)SXB.
12.2(33)SRA This command was integrated into Cisco IOS Release 12.2(33)SRA.
