Filter
Top Products
8
2. Raise the Left Upright (11) and the Right Upright (10) to
the position shown.
2
11
10
3. Attach the Hood (13) to the front of the Frame (14) with
two M5 x 10mm Screws (4).
3
4
4
13
14
4a
4. Hold the front of the Frame (14) between the Left Upright
(11) and the Right Upright (10). Align the holes near the
front of the Frame with the upper holes shown in the
Uprights. Tighten an M12 x 40mm Screw (5) with an M12
Washer (6) into each Upright and into the Frame.
6
5
5
6
11
14
10