Filter
Top Products
23
ADJUSTING THE SQUAT ARM, SEAT, OR
BUTTERFLY BACKREST
To adjust the height of the Squat Arm (32), first turn
the Adjustment Knob (115) on the Squat Bracket (37)
counterclockwise several turns to loosen it. Next, pull
the Handle and slide the Squat Bracket up or down to
the desired position. Engage the Handle into one of
the holes in the Squat Slider (not shown), and then
turn the Handle clockwise until it is tight.
The height of the Seat (16), the position of the
Butterfly Backrest (15), and the Swivel Carriage (not
shown) can be adjusted in the same way using the
three Adjustment Handles (65).
ADJUSTING THE SQUAT KNEE REST
To use the Squat Knee Rest (41), pivot it down to the
position shown and insert the Pin w/Tether (112) into
the holes in the Squat Knee Rest and the Long Base
(120).
When the Squat Knee Rest (41) is not in use, pivot it
up to a vertical position and then insert the Pin
w/Tether (112) into the hole in the Long Base (120).
32
120
41
112
115
37
16
15
65
65