5
Part Identification ChartÑModel No. WESY20000
R0800A
M10 Flat Washer (44)Ð16
M8 Nylon Locknut (37)Ð2
12.5mm Spacer (35)Ð2
M10 Nylon Locknut (42)Ð18
21mm Spacer (41)Ð2
M6 x 16mm Screw (31)Ð8
M10 x 60mm Bolt (38)Ð1
M10 x 127mm Bolt (43)Ð1
M10 x 42mm Bolt (46)Ð4
M10 x 67mm Bolt (48)Ð7
M10 x 27mm Bolt (51)Ð3
M4 x 16mm Screw (26)Ð1
M4 x 25mm Screw (57)Ð2
Refer to the drawings below to identify small parts used in assembly. The number in parenthesis below each
drawing is the key number of the part, from the Part List in the center of this manual. The number following the
key number is the quantity used in assembly. Note: Some small parts may have been pre-attached. If a part
is not in the parts bag, check to see if it has been pre-attached.