Filter
Top Products
8
7. Press a 38mm Bushing (29) into each end of the
Left Weight Glider (32). Slide the Left Weight Glider
onto the indicated end of the Barbell (35) and
secure it to the Barbell using an M8 x 16mm Screw
(50). Do not tighten the Screw yet. Make sure
the Left Weight Glider is oriented exactly as
shown.
8. Press a 50mm Bushing (47) into the indicated end
of a Weight Adapter (33). Slide the Weight Adapter
onto the Barbell (35) and secure it to the Barbell
using a Large Washer (44) and an M10 x 25mm
Bolt (43).
Attach the other Weight Adapter (33) to the other
end of the Barbell (35) in the same manner.
Tighten the M8 x 16mm Screws (50) used in
steps 6 and 7.
6
7
35
35
32
29
29
50
29
29
31
50
9. Note: This step requires the help of a second
person.
Slide the Right Safety Spotter (23) and the Left
Safety Spotter (24) onto the Weight Guides (18).
Make sure the Safety Spotters are oriented
exactly as shown.
Slide the assembled Locking Bar (34) and the Right
and Left Weight Gliders (31, 32) onto the Weight
Guides (18). Make sure the Locking Bar and
Weight Gliders are oriented exactly as shown.
33
35
47
44
43
8
23
18
18
24
34
31
32
9
6. Press a 38mm Bushing (29) into each end of the
Right Weight Glider (31). Slide the Right Weight
Glider onto the indicated end of the Barbell (35)
and attach it to the Barbell using an M8 x 16mm
Screw (50). Do not tighten the Screw yet. Make
sure the Right Weight Glider is oriented exactly
as shown.