Filter
Top Products
11
17. Have another person hold the Crossbar (20)
between the Rear Uprights (25) in the indicated
position. Make sure that the Crossbar is turned
exactly as shown.
Press a 51mm Round Inner Cap (32) into a Weight
Storage Tube (26). Attach the Weight Storage Tube
and one end of the Crossbar (20) to one of the
Rear Uprights (25) using two M10 x 78mm Bolts
(33) and two M10 Nylon Locknuts (11).
Attach a Weight Storage Tube (26) and the other
end of the Crossbar (20) to the other Rear Upright
(25) in the same way.
18. Press a 51mm Round Inner Cap (32) into a Weight
Storage Tube (26). Attach the Weight Storage Tube
to one of the Rear Uprights (25) using two M10 x
78mm Bolts (33), a Small Support Plate (16), and
two M10 Nylon Locknuts (11).
Attach the remaining Weight Storage Tube (26) to
the other Rear Upright (25) in the same way.
26
25
20
11
25
32
33
16
26
25
11
32
33
18
19. Make sure all parts are properly tightened before you use the weight bench. The use of all remaining
parts will be explained in Adjusting the Weight Bench, starting on page 12.
17