G B
9
O W NE R 'S MA N U AL • T 10
Safety switch
Power cord
NOTE! DON’T PUSH IN THE SAFETY SWITCH BEFORE
UNPLUGGING THE MACHINE’S POWER CORD.
If you leave the treadmill plugged in after turning
off the console, there will still be current running to
the console. This treadmill is equipped with a safety
control program that will automatically shut down
the machine after six hours of no use. In the event of
an automatic shut down, please follow the procedure
below to restart the treadmill:
A. Unplug the power cord form the machine’s socket.
Replug the power cord into the machine’s socket to
restart the machine.
MOVING AND STORAGE
After assembly is complete, you may fold the
machine into the upright position for storage. To hold
the machine, raise the desk until it locks in to position.
NOTE! Make sure you hear the click sound of the deck
locking into position. This is to ensure the deck is
locked in place and will not drop back down.
NOTE! Make sure the treadmill’s elevation is at 0
before folding the deck. If the elevation is not at 0,
folding will damage the mechanism.
First to step on the pedal, second push the frame
toward the console then leave the deck lower to the
floor.
NOTE! This machine has a built-in safety unfolding
feature to help the deck lower slowly. Please make
sure there are no children or other things under the
deck when you lower it.
TO MOVE THE TREADMILL
Before moving the T10, be sure the power cord is
unplugged from the wall and the treadmill. Fold
up the running deck until it is locked and push the
equipment on the transportation wheels. Lower the
treadmill carefully onto the floor. Hold the handlebar
to move forward the treadmill.
NOTE! Transport the treadmill with extreme caution
over uneven surfaces, for example over a step. The
treadmill should never be transported upstairs using
the wheels over the steps, instead it must be carried.
We recommend that you use a protective base when
transporting the equipment.