Suunto T6 Heart Rate Monitor User Manual


 
69
To install the Suunto sports Instrument:
1. The drivers are located on your PC software installation CD-ROM. Insert the CD-
ROM into your computer.
2. Attach the Suunto sports Instrument PC interface cable to the computer USB port.
The Found New Hardware Wizard is activated.
3. Click Next. The Install Hardware Device Drivers window opens.
4. Choose Search for a suitable driver for my device (recommended) and click Next.
The Locate Driver Files window opens.
5. Select Specify a location and browse for the driver folder on the installation CD-
ROM. Click Next. The Driver Files Search Results window opens.
6. Click Next to install the located driver.
7. Click Finish to finish the first part of the installation and proceed to the serial port
installation.
To install the USB serial port:
This should follow automatically once the Suunto sports Instrument installation is
complete. Repeat steps 3-6 to install the USB serial port. Then click Finish to close
the wizard. Do not interrupt the installation before both parts of the installation are
finished.
Once the installation of the serial port is completed, check that it has been successful.
Select Start - Settings - Control Panel - System - Hardware - Device Manager. Then
select View - Devices by connection.
The device should have been installed as Suunto USB Serial Port (COMx), attached
to Suunto sports Instrument.
WINDOWS XP/VISTA
The installation is in two parts. First you install the drivers for the Suunto sports
instrument and then for the virtual USB serial port.