Filter
Top Products
42
NOTE: When the stopwatch is on, you cannot view or erase the logs.
3.4.4. HR limits
With this function you can set limits for your target heart rate zone and receive an
alarm to notify when your heart rate is above or below the set limits. You can toggle
between HR limits on and off, by long pressing ENTER in the main modes. If HR
limits are active, number is displayed on the right hand side of the Training mode
display. Refer to chapter 4 for more information on alarms and limits.
• Low limit signal: - - - - - -
• High limit signal: -------------
To set the limits:
1.In the Training menu, scroll to Hr Limits and press
ENTER.
2.Press UP/DOWN to select On and press ENTER.
3.Set the desired high limit with UP/DOWN and press
ENTER.
4.Set the desired low limit with UP/DOWN and press
ENTER.
NOTE: The maximum heart rate limit is 240 and the mini-
mum heart rate limit is 30. The maximum limit cannot be
lower than the minimum and vice versa. If the maximum
rate is scrolled above 240, it continues from the minimum
rate upwards.
NOTE: In the log, the training session is divided into different zones according to your
HR limits regardless whether the limit alarm is on or off.