Suunto T6 Heart Rate Monitor User Manual


 
12
4. Carefully clean the inside sealing surface of the battery compartment before
placing your new battery in the compartment.
5. Place the new battery into the battery compartment with the positive side facing up.
Gently slide the battery underneath the contact plate, ensuring that the contact
plate does not break or bend out of place.
6. Place the new battery compartment cover on top of the battery compartment,
aligning the position marker on the cover with the open position marker on the
backside of your device.
7. Using the coin, gently press and turn the cover clockwise, until the position marker
on the cover is aligned with the close position marker on the back.
NOTE: When the battery has been replaced, ensure that the battery compartment is
correctly closed. This helps your Suunto device remain water-resistant. Careless bat-
tery replacement may void the warranty.
NOTE: Heavy use of the backlight, especially in the Night Use setting, will signifi-
cantly reduce battery life.