Filter
Top Products
44
Repeat for the second interval. The intervals are now set and you return to the
Training menu.
NOTE: Interval 1 can be set to alert in a range between 0.05 and 59.59. For interval 2
the range is between 0.00 and 59.59.
NOTE: After the timer reaches zero for interval 1, your Suunto t6 automatically
switches to interval 2 and starts the countdown of the interval. If interval 2 is set to
zero, it goes back to countdown for interval 1.
NOTE: If interval timer rounds are set to “- -”, the timer will run continuously, as long
as the stopwatch is running.
Warm-up
The warm-up timer starts after the Stopwatch has been activated. When the warm-up
time ends, a signal beeps, lap information is recorded and the time interval starts, if
activated. If warm-up is active, number is displayed on the right hand side of the
Training mode display.
To set the warm-up timer:
1.In the Training menu, scroll to Timers and press
ENTER.
2.Scroll to Warm-Up with UP/DOWN and press ENTER.
3.Press UP/DOWN to select On and press ENTER.
4.Set the minutes with UP/DOWN and press ENTER.
5.Set the seconds with UP/DOWN and press ENTER.
NOTE: Warm-up can be set to alert in a range between
0.00 and 59.59.