Filter
Top Products
12
During this activity when the stopwatch is running, the [-] button can be used to store up to 50 split times (way
point times) to be viewed after the race has been completed. The split time (way point time) will be displayed for
10 seconds after pushing the [-] button.
The stopwatch is stopped by pressing the [+] button twice within two seconds. This will eliminate accidental
stops of the stopwatch. The finish time is also stored in the memory. After the stopwatch has been stopped, the
[-] button returns the user to the countdown display.
PRESS the [Mode] button once to return to the Sailing Timer main mode.
2.1 SAILING TIMER MEMORY SUB MODE
In the Sail mode, PRESS the [Select] button once.
In the first display (Fig. 4):
Field 1 shows the year of race;
Field 2 shows the starting time of the race; and
Field 3 shows starting date of race and the text log book and memory to the left.
PRESS the [+] button to view the second display.
In the second display (Fig. 5):
Field 1 shows the seconds and tenths of seconds of the timed event;
Field 2 shows the hours and minutes of the event; and
Field 3 shows the text dUr (dUr = duration).
PRESS the [+] button to display the stored split times (way point times) (Fig. 6):
Field 1 shows the seconds and tenths of seconds of the split time;
Field 2 shows the hours and minutes of the split time; and
Field 3 shows the actual time when the split time was taken. If you stop to view this display the date as well
as the year of the split moment will start alternating with the time.
PRESS the [+] and [-] buttons to scroll through the split times.
PRESS the [Select] button to exit and return to the main mode.