Suunto MARINER | REGATTA | YACHTSMAN Watch User Manual


 
11
CHAPTER 2 SAILING TIMER MODE (MARINER AND
YACHTSMAN)
To view Sailing Timer:
Check the Mode Indicator Bar. If the mode arrow is not on SAIL, PRESS the [Mode] button until the arrow is
directly below SAIL on the bar.
In the Sail mode (Fig. 2.):
Field 1 the selected time to be counted down in minutes, maximum 120 minutes;
Field 2 the time to be counted down in minutes and seconds; and
Field 3 the current time and the text log book to the left of the current time.
To set the count down, PRESS the [-] button, the selection will begin with 120 minutes. It is adjustable in 10-
minute increments, from 120 to 60 minutes, in 5-minute increments, from 60 to 15 minutes, and from 15 minutes
to 0 by the minute. Continue pressing the [-] button until the desired minute is achieved. The selected time is
stored in Field 1.
To begin the count down, PRESS the [+] button.
During the count down the timer will activate audible signals.
Interval Audible signal
Every full minute Short double beep
Every 10 seconds during the last minute Short double beep
Every second during the last ten seconds Short single beep
At the completion of the count down Long single beep
When the time to count down has been reached, a stopwatch will automatically start running (Fig. 3). The range
of the stopwatch is 120: 00,00.
Field 1 displays the seconds and tenths of seconds of the event;
Field 2 displays the hours and minutes of the event; and
Field 3 displays the current time and the text logbook to the left of the current time.