Star Trac 7600 Treadmill User Manual


 
Service Manual: E-TR and E-TRi
38
Uploading Software into the Uploaders
The following procedure explains how to upload software into the grey uploader boxes. The software
may be downloaded from the Star Trac Support Website (http://support.startrac.com/Software).
Click on the Service Provider tab at the top then click on the Latest Product Software link.
The Pro Tread Series display uses a flash memory system to store the software that runs the
treadmill. To update the software requires the use of two “uploader” boxes and a PC. (Note: The PC
is to upload the software into the uploaders only.)
This section will explain:
x Assembling the uploader boxes and connecting the RS232 cable to the PC.
x Installing the FISP software onto your PC (FISP software is used to put the Pro Tread software
into the uploader boxes).
x Installing Pro Tread software into the uploaders for two micro controller types (Mega 103 and
Mega 128)
o Primary and Secondary box
Time Required
x 10-15 minutes
Parts Required
x (2) Uploader kits
Note: There are two styles of uploaders. The newest style (USB) is:
Star Trac part number: 610-0281 which contains one each of
the following parts:
9 (1) Grey uploader box
9 (1) Data cable
9 (1) USB cable
8 The USB style uploaders do not require a
battery pack.
**You will need 2 each of 610-0281 kits in
order to have Primary and Secondary
software available during uploads.
Tools Required
x Phillips head screw driver
x PC computer with Windows 95 or higher
Software Required (on your PC)
x Winzip (or equivalent)