Star Trac 7600 Treadmill User Manual


 
Service Manual: E-TR and E-TRi
20
Running Belt Alignment
Fig 7
Step 1: Start the treadmill and set the speed to
3.0 mph (5.0 kmh). Make sure the running belt
tracks to the center (see Fig 7).
If the running belt shifts or tracks to either side
(left or right), follow the appropriate procedure
below.
To move belt back towards the center
if it has tracked to the LEFT side:
To move belt back towards the center
if it has tracked to the RIGHT side:
Turn the LEFT
bolt ¼ turn
clockwise
Turn the RIGHT
bolt ¼ turn
counter-clockwise
Turn the LEFT
bolt ¼ turn
counter-clockwise
Turn the RIGHT
bolt ¼ turn
clockwise
Repeat above steps until the running belt tracks in the center.