Star Trac 7600 Treadmill User Manual


 
Service Manual: E-TR and E-TRi
23
Step 2:
x Using the screwdriver, remove the three screws from the left and the three screws from
the right finger guards (Fig 4).
x Remove both finger guards (Fig 5).
Fig 4
Fig 5
CAUTION
: The next step involves working near moving parts. BE CAREFUL!
Be mindful of loose clothing, long hair, loose and/or hanging jewelry, etc.
Step 3:
x Insert the straw onto the bottle of wax (Fig 6).
x Start the treadmill at 3.0 mph (5.0 kmh).
x While the treadmill is running, squirt about 5-8 times on the left
side onto the underside of the running belt (Fig 7) and 5-8 times
on the right side onto the underside of the running belt (Fig 8).
x Check the bottle and make sure you have used at least half
the
bottle of wax (Fig 9). It may be necessary to use a full bottle
x Run on the treadmill for about 2 minutes.
Fig 6
Fig 7
Fig 8
Fig 9
Fig 10
Step 4:
x Stop the treadmill and reinstall both finger guards with screws (Fig 11).
x Wipe off any excess wax (Fig 12).
Fig 11
Fig 12