Filter
Top Products
20
Time required:
15 Minutes
Parts required:
727-0083 Spinning
®
Computer Kit
Note: The thin spacer is used on Pro 5800 / 6800 and
Elite 5900 bikes.
ools required:
M5 Allen Wrench
M2 Allen Wrench
Place the thin insert inside the bottom part of the
Mounting Bracket Clamp. Then position the mounting bracket onto the center-
curved portion
of the handlebars. Once positioned correctly, tighten
the 4 M6x20 screws using the M5 Allen
tool.
Install the computer onto the mounting bracket by
sliding the computer clamp over the long portion of the
bracket. Tighten computer clamp with the M6 screw
and nut using the M5 Allen tool.
Note: Use the M6x30 screw for the computer
clamp when installing onto the computer
mounting bracket.
Mounting Computer On Handlebars - Pro 5800 / 6800 / Elite 5900