Filter
Top Products
15
Spinning
®
Computer is pre-set with a gear ratio 2
and a setting display distance in miles. It is
also pre
-
set with recommended default settings for the length of time the backlight will stay on when
activated and the length of time summary information will be display
ed.
You can make changes to
these settings by following the steps below. (You will first need to install 4 AA batteries in the
computer.) Any time you want to change setting or v
iew information, follow these Setup M
ode steps
To activat
e Setup Mode:
1. Press any button to activate computer.
2. Wave a magnet along the right side of the Spinning
®
Computer until
the display window shows all LCD segments flash.
3. Press Toggle (right) button to scroll through available setup options.
4. Press the Light (left) button to change settings on the current display option.
Setup
Mode options:
• GEAR and Software Version
o Gear Ratio, Select 1 (2.875) for V-Bikes.
o Select 2 (3.250) for all other models.
o Software Version displayed (-XX)
Note: User will not get the correct RPM values if
the Gear Ratio setting is not correct.
(Default Setting)
Setup Mode