Filter
Top Products
ASSEMBLY INSTRUCTIONS
9
STEP 7
Slide the STATIONARY HANDLEBAR SLEEVE(38) onto the STATIONARY HANDLEBAR(103).
Connect the PULSE SENSOR WIRES(34) to the PULSE WIRE(33). Insert the STATIONARY
HANDLEBAR(103) onto the UPRIGHT(4) and secure with SOCKET HEAD BOLTS(M8 x 35mm)(68)
and NYLOCK NUTS(M8)(85). Slide the STATIONARY HANDLEBAR SLEEVE(38) down to cover
the bolts on the
STATIONARY HANDLEBAR(103).
STEP 8
Connect the UPPER CONNECTION WIRE(31) and the PULSE WIRE(33) to the COMPUTER(32).
Attach the COMPUTER(32) onto the UPRIGHT(4) by inserting the BRACKET in the COMPUTER(32)
into the UPRIGHT(4) and secure with SOCKET HEAD BOLTS(M8 x 25mm)(70) and LOCK
WASHERS(M8)(88).