Filter
Top Products
ASSEMBLY INSTRUCTIONS
7
STEP 3
Connect the LEFT and RIGHT PEDAL ARMS(9, 10) to the PEDAL ARM CONNECTORS(12) with BUTTON
HEAD BOLTS(M10x1.25x55mm)(78), WASHERS(M10)(91), and NYLOCK NUTS(M10x1.25)(86).
STEP 4
Connect the LINKAGES(11) to the LEFT and RIGHT PIVOTING ARMS(7, 8) with BUTTON HEAD BOLTS
(M8x1.25x50mm)(77) and NYLOCK NUTS(M8x1.25)(85).
STEP 5
Attach the PEDAL CAPS(48) onto the LEFT and RIGHT PEDAL ARMS(9, 10) with ROUND HEAD BOLTS
(M6x1x50mm)(74) and NYLOCK NUTS(M6x1)(83). Slide the PEDAL DIVIDERS(49) into one of the four
slots on the PEDAL CAPS(48) to fit your shoes. You may select the front or the back of the PEDAL
CAPS(48) for foot placement. You will have more vertical movement in the Elliptical stride if you place your
feet at the back of the PEDAL CAPS(48).
CAUTION:
The lip on the PEDAL CAPS(48) must face inside. The sides without a lip face outside as
shown.