Filter
Top Products
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:
parts@staminaproducts.com
6
ASSEMBLY INSTRUCTIONS
STEP 1
NOTE: There is a "R" decal on one end of the REAR STABILIZER(2).
Attach the REAR STABILIZER(2) onto the MAIN FRAME(1) with the "R" decal end on the right side and
secure with CARRIAGE BOLTS(M8x1.25x85mm)(65), WASHERS(M8)(90), and NYLOCK NUTS(M8x1.25)
(85).
STEP 2
Slide the UPRIGHT SLEEVE(18) onto the UPRIGHT(3). Connect the MOTOR CONNECTION WIRE(29),
SPEED SENSOR WIRE(32), and POWER WIRE(33) to UPPER CONNECTION WIRE(35). Insert the
UPRIGHT(3) onto the MAIN FRAME(1) and secure with BUTTON HEAD BOLTS(M8x1.25x20mm)(76),
LOCK WASHERS(M8)(89), and WASHERS(M8)(90). Slide the UPRIGHT SLEEVE(18) down to cover the
bolts on the UPRIGHT(3).
R
RIGHT
LEFT