Filter
Top Products
TABLE OF CONTENTS
Safety Instructions 2
Before You Begin 4
Equipment Warning & Notice Labels 5
Hardware Identification Chart 6
Assembly Instructions 7
Set Up Instructions 12
Operational Instructions 13
Computer Instructions 14
Storage 18
Maintenance 18
Conditioning Guidelines 19
Warm-up and Cool-Down 20
Warranty 21
Product Parts Drawing 22
Parts List 23
Notes 25
Fax/Mail Ordering Form 26
Page Page
SAFETY INSTRUCTIONS
To reduce the risk of serious injury, read the following Safety Instructions before
using the Magnetic Fusion 4550 Bike.
WARNING:
2
Before starting any exercise or conditioning program you should consult with your personal
physician to see if you require a complete physical exam. This is especially important if you
are over the age of 35, have never exercised before, are pregnant, or suffer from any
illness. READ AND FOLLOW THE SAFETY PRECAUTIONS. FAILURE TO FOLLOW
THESE INSTRUCTIONS CAN RESULT IN SERIOUS BODILY INJURY.
WARNING:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
Read all warnings posted on the Magnetic Fusion 4550 Bike.
The Magnetic Fusion 4550 Bike should only be used after a thorough review of the Owner's Manual.
We recommend that two people be available for assembly of this product.
Keep children away from the Magnetic Fusion 4550 Bike. Do not allow children to use or play on the Magnetic
Fusion 4550 Bike. Keep children and pets away from the Magnetic Fusion 4550 Bike when it is in use.
The Magnetic Fusion 4550 Bike is not a freewheeling exercise bike; therefore, pedal speed should be reduced
in a controlled manner to prevent injury from spinning pedals.
Make sure the Magnetic Fusion 4550 Bike is properly assembled and that all nuts and bolts are tightened
before use.
It is recommended that you place this exercise equipment on an equipment mat.
Set up and operate the Magnetic Fusion 4550 Bike on a solid level surface. Do not position the Magnetic
Fusion 4550 Bike on loose rugs or uneven surfaces.
Make sure that adequate space is available for access to and around the Magnetic Fusion 4550 Bike.
Adjust the LEVELING CAPS(53) and STAND(54) so that the Magnetic Fusion 4550 Bike sits on the floor
without rocking. See page 12 for detailed leveling instructions.
Before using, inspect the Magnetic Fusion 4550 Bike for worn or loose components, and tighten or replace
any loose or worn components prior to use.
Before using, always check the Seat Frame to be sure it is secure. The ADJUSTMENT KNOB(50) must be
inserted into one of the holes in the Rear Frame and tightened.
Each user should adjust the seat per instructions on page 13.
Do not attempt to adjust the seat while you are on the Magnetic Fusion 4550 Bike.
Consult a physician prior to commencing an exercise program and follow his/her recommendations in developing
your fitness program. If at any time during exercise you feel faint, dizzy, or experience pain, stop and consult
your physician.
Follow your physician's recommendations in developing your own personal fitness program.
Always choose the workout which best fits your physical strength and flexibility level. Know your limits and train
within them. Always use common sense when exercising.
Do not wear loose or dangling clothing while using the Magnetic Fusion 4550 Bike.
Never exercise in bare feet or socks; always wear proper footwear such as running, walking, or cross training
shoes that fit well, provide foot support, and feature non-skid rubber soles.
Care should be taken in mounting or dismounting the Magnetic Fusion 4550 Bike.
The Magnetic Fusion 4550 Bike should not be used by persons weighing over 300 pounds.
The Magnetic Fusion 4550 Bike should be used by only one person at a time.
Do not ride the Magnetic Fusion 4550 Bike while standing up.
The Magnetic Fusion 4550 Bike is for consumer use only. It is not for use in public or semipublic facilities.