Stairmaster 2100 LE Treadmill User Manual


 
7
UNPACKING and INSTALLATION INSTRUCTIONS
Please refer to the Treadmill Unpacking & Installation Instructions that shipped with the
treadmill. These instructions provide information regarding receiving your order, site
requirements, unpacking and installation steps, and testing the treadmill and controller.
The treadmill and controller must be installed correctly before being used. StairMaster
®
recommends that you contact your treadmill dealer or sales representative when your
equipment arrives. The representative will help unpack, install, and demonstrate it, to ensure
that:
The equipment is free from shipping damage.
The treadmill is connected correctly to the appropriate AC power source.
Installation and operation are in accordance with StairMaster standards.
Incorrect installation by unauthorized personnel can lead to equipment damage and may void
the warranty.
WARNING
THE TREADMILL MUST BE ON A DEDICATED BRANCH CIRCUIT.
NO OTHER DEVICE SHOULD BE CONNECTED TO THAT CIRCUIT.
EXCESSIVE RISK CURRENT (LEAKAGE) CAN RESULT IF THE EQUIPMENT IS NOT
PROPERLY GROUNDED.
FAILURE TO FOLLOW THESE GUIDELINES WILL PRODUCE A SERIOUS OR POSSIBLY
FATAL ELECTRICAL SHOCK HAZARD.
CONSULT A QUALIFIED ELECTRICIAN AS REQUIRED.
Accessories and Options
An operator manual (P/N 27483) is shipped with each treadmill. The following options are
available:
Part No. Description
36147-001 Left Handrail Kit
36147-002 Right Handrail Kit
36147-003 Left and Right Handrails
34198-003 Transmitter Belt with strap (HRM)
To avoid potential safety and electrical problems, use parts and accessories
that meet StairMaster specifications.
How to Reach Us
For Technical Assistance / Parts:
North America: 800-331-3578
International: 800-864-1270 x1603
See addresses and phone numbers listed at the end of this manual.