Filter
Top Products
Page 52 of 75
intelligent wireless platform
airClient™ TOTAL 3415 User Guide
3. Wireless Settings and Bandwidth Controller
3.1. Wireless Settings
The Wireless Settings can be accessed from the Radio | Wireless Settings in the navigation menu bar.
Figure 3-1 airClient TOTAL Wireless Settings
The following table summarizes the information for the wireless settings.
Table 3-1 Wireless Settings
Page Items Descriptions
SSID The network name for the wireless network.
SSID Suppressed
Shows if the SSID Suppressed is Enable or Disabled
Channel
This is not selectable in the current Router/NAT device
configuration or Client Bridge Mode configuration on3415-03.
The client will follow the channel of the AP to be associated
with.
The channel has to be set explicitly in the WDS Bridge Mode
configuration (sB3415-03 only)
Remote AP MAC
Address
This is the MAC address of the remote Access Point.
This has to be set in WDS Bridge Mode configuration (sB3415-