Filter
Top Products
Page 32 of 75
intelligent wireless platform
airClient™ TOTAL 3415 User Guide
Figure 2-17 airClient TOTAL Bridge Radio Settings – Non-Transparent bridging (sB3415-03 Only)
Note : In non-transparent bridging configuration, when airClient TOTAL is associated, the MAC
addresses seen on the AP Association table, will be the MAC address of the sB3415-03 device, and not
of the devices behind the sB3415-03 unit.
Transparent Bridging (Single MAC only)
This configuration supports single device connection behind the airClient TOTAL sB3415-03 unit.
System Configuration
Follow the steps below to configure the sB3415-03 unit for Transparent Bridging –
1. From the navigation menu bar, click on Tools | System Configuration.
2. In the Current Operational Mode, click on IP Mux Disable radio button.
3. Click on Save to save the changes. The settings will be applied after the reboot.