Filter
Top Products
40. Press a 1 1/2” Square Inner Cap (32) into the Leg
Lever (29).
Lubricate the 5/16” x 2 1/4” Bolt (33). Attach the Leg
Lever (29) to the Seat Frame (36) with the Bolt and
a 5/16” Nylon Locknut (3).
Do not overtighten the Nylon Locknut. The Leg
Lever must be able to pivot freely.
Insert the 5/16” x 2” Eyebolt (35) into the Leg Lever
(29) from the direction shown. Tighten a 5/16” Nylon
Locknut (3) with a 5/16” Flat Washer (8) onto the
Eyebolt.
41. Rest the Butterfly Seat Frame (36) on the indicated
pin (A) in the Butterfly Upright (42). Attach the
Butterfly Seat Frame to the Butterfly Upright with a
5/16” x 2 3/4” Carriage Bolt (14) and the Seat Knob
(40).
40
17
33 Lubricate
35
3
29
8
3
36
32
41
40
14
A
36
42
42. Press two 3/4” Round Inner Caps (34) into each Pad
Tube (28).
Insert one Pad Tube into the Butterfly Seat Frame
(36). Slide a Foam Pad (30) onto each end of the
Pad Tube.
Insert the other Pad Tube into the Leg Lever (29).
Slide a Foam Pad (30) onto each end of the Pad
Tube.
42
34
30
28
30
34
36
29
Miscellaneous Assembly
43. Leg Press Assembly
Attach the Leg Press Plate (87) to the Adjustment
Tube (88) with a 5/16” x 2 1/2” Bolt (22), two 5/16”
Flat Washers (8) and a 5/16” Nylon Locknut (3).
Make sure the Leg Press Plate and the
Adjustment Tube are oriented as shown.
Press a 1 3/4” Square Inner Cap (44) into the
Adjustment Tube (88).
43
87
8
22
3
44
88