Filter
Top Products
The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also
allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.
To select the information mode, hold down the STOP
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The SPEED/PACE display will
show an “E” (for English miles)
or an “M” (for metric kilome-
ters). The unit of measurement
can be changed by pressing
the SPEED + button.
The DISTANCE/LAPS display
will show the total number of
miles that the walking belt has
moved.
The TIME display will show the
total number of hours that the
treadmill has been used.
IMPORTANT: Make sure
that there is not a letter “d”
in the CALS/FAT CALS dis-
play. If a “d” appears in the
display, the console is in the
“demo” mode. This mode is intended to be used only
when a treadmill is displayed in a store. When the con-
sole is in the demo mode, the power cord can be
plugged in, the key can be removed from the console,
and the displays and indicators on the console will au-
tomatically light in a preset sequence, although the
buttons on the console will not operate. If a “d” appears
in the CALS/FAT CALS display when the informa-
tion mode is selected, press the SPEED – button so
the display is blank.
To exit the information mode, remove the key from the
console.
THE INFORMATION MODE/DEMO MODE
23