Filter
Top Products
20
THE INFORMATION MODE
T
he console features an information mode that keeps
track of the total number of hours that the treadmill has
b
een used and the total number of miles that the walk-
ing belt has moved. The information mode also allows
you to select miles or kilometers as the unit of mea-
surement for speed and distance. In addition, the infor-
mation mode allows you to turn on and turn off the
demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:
The Time display will show
the total number of hours
the treadmill has been
used.
The Distance display will
show the total number of
miles or kilometers that the
walking belt has moved.
The center display will show
the contrast setting for the
center display. To change
the contrast of the center
display press the Incline in-
crease and decrease but-
tons.
An “E” for English miles or
an “M” for metric kilometers
will appear in the Speed dis-
play. Press the
Speed in
-
crease button to change the
unit of measurement if de-
sired.
Note: The console features a
display demo mode, de-
s
igned to be used if the
treadmill is displayed in a
s
tore. While the demo mode
is turned on, the console will
function normally when you plug in the power cord,
switch the reset/off circuit breaker to the reset position,
and insert the key into the console. However, when
you remove the key, the displays will remain lit, al-
though the buttons will not function. If the demo mode
is turned on, a “d” will appear in the Speed display
while the information mode is selected. To turn on or
turn off the demo mode, press the Speed decrease but-
ton.
To exit the information mode, remove the key from the
console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’s
stereo speakers, you must connect your MP3 player,
CD player, or personal audio player to the console
through the audio jack.
Locate the audio wire and plug it into the audio jack on
the console. Then plug the audio wire into a jack on
your MP3 player, CD player, or personal audio player.
Make sure that the audio wire is fully plugged in.
Next, press the Play button on your MP3 player, CD
player, or personal audio player. Then, adjust the vol-
ume on your MP3 player, CD player, or personal audio
player.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat sur
-
face instead of on the console.