Filter
Top Products
19
HOW TO USE A CUSTOM WORKOUT
1
. Insert the key into the console.
S
ee HOW TO TURN ON THE POWER on page
13.
2. Select one of the custom workouts.
To select a custom workout, press the Create Your
Own button until the name of the desired workout
appears in the matrix.
When a custom workout is selected, the Incline
display will show the maximum incline setting of
the workout and the Speed display will show the
maximum speed setting. The Time display will
show how long the workout will last.
The matrix will show
the first speed settings
of the workout.
Note: If
only three columns of
indicators appear in
the matrix, see HOW
TO CREATE A CUSTOM WORKOUT on page
18.
3. Press the Start button to start the workout.
A moment after you press the button, the treadmill
will automatically adjust to the first speed and in-
cline settings of the workout. Hold the handrails
and begin walking.
Each custom workout is divided into one-minute
segments. One speed setting and one incline set-
ting are programmed for each segment. (The same
speed setting and/or incline setting may be pro-
grammed for consecutive segments.)
Durring the workout, the
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout.
The height of the flashing segment indicates the
speed setting for the current segment. At the end of
each segment, a series of tones will sound and the
next segment of the profile will begin to flash. If a
different speed or incline setting is programmed for
the next segment, the speed or incline setting will
flash in the display to alert you.
The workout will continue in this way until the last
s
egment of the profile flashes in the display and
the last segment ends. The walking belt will then
slow to a stop.
If desired, you can redefine the workout while
using it.
To change the speed or incline setting
for the current segment, simply press the Speed
or Incline increase and decrease buttons. When the
current segment ends, the new setting will be saved
in memory.
To increase the length of the workout,
first wait until the workout is completed. Then, press
the Start button and program speed and incline set-
tings for as many additional segments as desired.
When you have added as many segments as de-
sired, press the Stop button twice. To decrease the
length of the workout,
press the Stop button twice
at any time before the workout is completed.
To stop the workout at any time, press the Stop
button. The Time display will begin to flash. To
restart the workout, press the Start button or the
Speed increase button. After a moment, the walk-
ing belt will begin to move at 1 mph. When the next
segment of the workout begins, the treadmill will au-
tomatically adjust to the speed and incline settings
for the next segment.
4. Follow your progress with the matrix and the
displays.
See step 5 on pages 14 and 15.
5. Measure your heart rate if desired.
See step 6 on page 15.
6. When you are finished exercising, remove the
key from the console.
See step 7 on page 15.
Current Segment