Filter
Top Products
23.
24.
Insert
the Select
Pin
(65)
into the desired
hole in the
Center Guide
Rod
(70)
as shown. Carefully to lock the
pin
in
place.
Place
the Guide
Rod Top Plate
(73)
on top of the two Guide Rods
(77)
and slide the two Guide
Rod Cups
(74)
onto
the Guide Rods
(77)
with downward
pressure.
lnsert two Allen bolts
(71)
into
the threaded holes in
the Guide
Rod Cup Pockets of the Guide
Rod Top Plate
(73).
Tighten securely.
Attach the
Pec Deck Support Frame
(62)
and the
Pec Deck Backing Frame
(64)
to the Pec Deck
Support Post
(16)
using one
longer bolt
(57),
one shorter bolt
(58),
four washers
(18)
and two nuts
(20)
as shown.
Be sure
this
assembly
is centered and level and then tighten
the bolts securely.
STEP # 1: MAIN
FRAME
ASSEMBLY
a3-
69
e0
18