Filter
Top Products
10
8. Hold a Bolt Spacer (79) inside the lower end of
the Left Upright (73). Insert an M10 x 96mm Bolt
(5) with an M10 Star Washer (8) into the Left
U
pright and the Bolt Spacer. Repeat this step
with a second Bolt Spacer (79), M10 x 96mm
B
olt (5), and M10 Star Washer (8).
Orient the Left Upright Spacer (83) and the Left
Upright (73) as shown. Hold the Left Upright
Spacer and the Left Upright against the Base
(85). Tighten the M10 x 96mm Bolts (5) until the
heads of the Bolts touch the Upright; do not fully
tighten the Bolts yet.
83
73
5
85
7
9
8
8
9. Press a Base Cap (82) into the Base (85).
With the help of a second person, tip the treadmill
so that the Base (85) is flat on the floor.
82
85
9
10. Attach the Dumbbell Rack (100) to the Uprights
(73, 78) with four 1/4" x 3/4" Bolts (98) and four
1/4" Star Washers (99); do not fully tighten the
Bolts yet.
73
78
99
99
98
98
99
98
99
98
100
10