Filter
Top Products
9
8. Insert the Book Rack (84) into the console as-
s
embly; it may be helpful to rock the Book Rack
up and down as you insert it. Attach the Book
Rack with five 3/4" Screws (10);
start all five
Screws and then tighten them.
See step 6. Tighten the two 3/8" x 4" Bolts (6).
See step 5. Tighten the two 3/8" x 4" Bolts (6).
10
10
8
4
Console Assembly
10
8
9. If necessary, press the Left Tray (86) and the
Right Tray (85) into the top of the console as-
sembly.
Console
Assembly
86
85
9
10. Identify the Latch Assembly (55). Remove the
tie from the end of the tube. Make sure that the
sleeve has been slid over hole 1 and that the
Latch Knob (54) is locked into hole 1.
Pull on
the sleeve to make sure that it is locked into
place.
Next, make sure that the Latch Knob (54) is
locked into hole 2. If it is not, pull out the tube
until you see hole 2 and then slide the tube back
in until the Latch Knob locks into hole 2.
10
54
Sleeve
Hole 1
Hole 2
Tube
55