Filter
Top Products
page 20
COMMERCIAL PRODUCTS DIVISION
22. Level the unit. Diagram 16. To keep the unit stable, the EFX has adjustable
rear pads and, at the front of the base assembly, a height adjustor. Check to
make sure that the unit does not wobble from side to side or front to back.
Important: If the unit is placed on a slightly, uneven surface, adjusting the
rear pads can help, but will not compensate for extremely uneven surfaces.
a. To remove any side to side movement or wobble, rotate the rear pads.
b. To counteract any rocking (front to back) motion, ask your assistant to
grasp the upright support so that he or she can raise the front of the unit
off the floor. Use a crescent or combination wrench to loosen the nut.
• Turn the height adjustor clockwise to raise the height of the front end.
• Turn the height adjustor counterclockwise to lower the height.
Once you have the proper height adjustment, use the wrench to turn the
nut counterclockwise and tighten it securely against the base tube.
Diagram 16
Level the unit.
Height adjustor
Rotate rear
adjustment pads.
Rear crossbar
Base tube
Nut
Diagram 17
Clean the ramp.
Roller
Wipe ramp with a
damp, clean cloth.
Ramp
Foot pedal
23. Clean the ramp. Diagram 17. Wipe down the ramp and foot pedals with a
soft cloth dampened in a diluted solution of mild soap and water.