Filter
Top Products
page 10
COMMERCIAL PRODUCTS DIVISION
Diagram 3
EFX534
Hardware kit
HARDWARE KIT
Carefully unpack the parts from the shipping container. Open the Hardware Kit
and make sure that you have the following items as shown in Diagram 3:
❑ (A) 5/16-inch hex key — secures handlebars
❑ (B) End cap
❑ (C) Two shoulder bolts — install handlebars to lower pivot arms
❑ (D) Four Phillips-head screws — attach display console
❑ (E) Six 1-inch long x 5/16-inch diameter bolts — attach handlebars
❑ (F) Six small diameter washers — use with 5/16-inch bolts (E)
❑ (G) Eighteen 1-inch long x 3/8-inch bolts — attach upright and stabilizers to base
❑ (H) Eighteen large diameter washers — use with 3/8-inch bolts (G)
❑ (J) Height adjustor
If any items are missing, contact your dealer. If you need Customer Support,
refer to
Obtaining Service
on page 7.
Note: After assembling the EFX, be sure to store the hex key in a secure place.
The tool is used for maintenance procedures that are described in this manual.
B
A
C
D
E
F
H
G
J