Filter
Top Products
TIME ELAPSED and TIME REMAINING
TIME ELAPSED—displays time in minutes and seconds and
indicates the amount of time you have been exercising.
When you exceed 60 minutes during a single session, the
display converts to hours and minutes.
Note: The fitness facility can place limits on workout time.
TIME REMAINING—shows the amount of time remaining in
a workout. If the selected time is less than 60 minutes, the
display shows time in minutes and seconds. If you select a
time greater than 60 minutes, the display reflects hours and
minutes until the countdown reaches 60 minutes, at which
time the display reverts to minutes and seconds.
Note: If you select a
NO LIMIT
time goal, the TIME
REMAINING display appears blank. Press the left selection
key if you wish to display elapsed time.
INCLINE
INCLINE—displays the percentage of incline or decline
during your workout. The INCLINE keys affect the lift and let
you set an incline between 0% and 15% (956i/946i) and a
minus 3% to 15% (966i). The values displayed can change
in 0.5% increments.
SPEED
SPEED—displays the running belt speed in miles per hour
(mph) or kilometers per hour (kph). The running belt speed
ranges between 0.5 and 16 mph (0.8 to 25 kph) on the 95
and 966i treadmills. The 946i has a range of 0.5 to 12 mph
(0.8 to 20 kph). The speed can be changed in 0.1
increments using the SPEED keys.
.5 6i
Note: You can press the SPEED down key to stop the
running belt. When
0
appears in the SPEED display, the
running belt stops.
DISTANCE, PACE, and AVERAGE SPEED
DISTANCE—shows linear distance in either miles or
kilometers. The distance is calculated based on your speed.
PACE—displays your target speed in minutes and seconds
per mile (or kilometer). For example, the number
4:23
indicates that your pace (speed at which you are moving) is
4 minutes and 23 seconds per mile.
AVERAGE SPEED—indicates the average speed associated
with your workout.
User's Reference Manual: Display Console 19