Filter
Top Products
Owner’s Manual: Maintenance 44
Adjusting the Running Belt
If you are unsure about adjusting the running belt, call
Precor Customer Support. Refer to Obtaining Service.
CAUTION: For your safety, use the power switch to turn
Off the treadmill before making any adjustments. Do not
adjust the running belt when someone is standing on
the unit.
1. Locate the right belt adjustment bolt in the rear end
cap of the treadmill. Refer to Diagram 14.
Diagram 14: Location of the adjustment bolt
To determine left and right, stand at the rear of the
treadmill and face the display. Make all belt adjustments
on the right rear corner bolt using the hex key provided.
• If the belt is off center to the LEFT, turn the adjusting
bolt ¼ turn counterclockwise, which moves the
running belt to the right.
• If the belt tracks off center to the RIGHT, turn the bolt
¼ turn clockwise; this moves the belt to the left.
Important: Do not turn the adjusting bolt more than ¼
turn at a time. Overtightening the bolt can damage the
treadmill.
2. Recheck the alignment of the running belt by repeating
the steps found in Checking the Alignment of the
Running Belt.
Long-Term Storage
When the treadmill is not in use for any length of time, turn
it Off. Make sure that the power cord is unplugged from its
power source and is positioned so that it will not become
damaged or interfere with people or other equipment.
92x_Owners Manual.book Page 44 Wednesday, March 5, 2008 2:31 PM