Pentax R-335(N) Home Gym User Manual


 
PSF Software Ver.365
49
6.XON/XOFF: OFF
Please note that these settings should be common with DL-01's.
b-4 Recommended communication settings on DL-01
To configure DL-01 Communication setting, please read "Configuring the
software" in the Help topics of DL-01. And select values as follows.
For setting “Type of Device” in the "Settings" panel (Menu—“Edit”--”Settings”),
select “PCS-300/R-100(PCS)/R-300(PSF)” for “R-300 PentaxSpecificationFunction” and
other setting should be as follows.
(Please note that these settings should be common with -300's. And if the selection of
“Type of Device” is not collect it may result in missing some data.)
R-300BPC(DL-01)
Bits per second: 1200 (1200-9600 for sending "SURVEY DATA")
Databits: 8
Parity: None
Stop bits: 1
PC(DL-01)B -300
Bits per second: 1200
Databits: 8
Parity: None
Stop bits: 1
c) Note for the Memory capacity
Data transfer failure from DL01 to R-300 may cause reduction of memory capacity. If memory
capacity becomes less, please back up required data first, and then initialize coordinates data.
To initialize coordinates data, turn on the instrument while pressing [F2]+[F5]+[ON/OFF] keys,
and take your finger off from [ON/OFF] again.
After you see the message "COORD. DATA INITIAL", press [F5] key. Then the message
"Please,
wait" is displayed. When it is completed, the panel of Electronic Vial is displayed.