Filter
Top Products
PSF Software Ver.365
26
5 RDM
Detailed Operating procedures
Access the RDM according to "1. ACCESSING THE SPECIAL FUNCTIONS".
Step 1 Observation of the reference point
(1) PRISM H
INPUT PRIZM H
ENT
MEAS
ENT
Go to Step 2
Step 2 Observation of the target point (P1)
(1) PRISM H
INPUT PRISM H
ENT
MEAS
ENT
ENT
(2) PRISM H
INPUT PRISM H
ENT
MEAS
ENT
ENT
*Use [DIST] key to change the distance display (REF-P/P-P)
(3) PRISM H
INPUT PRISM H
ENT
MEAS
ENT
* Use [DIST] key to change the distance display (REF-P/P-P)
The slope that can be calculated and displayed with the RDM function is within +/-200.00 %.
The difference in height is indicated in +/-.
Display the
distance to P1
Display the distance between the
reference point and P1
Display the
distance to
Display the distance between the reference point
and P2, and the distance between P1 and P2
Display the
distance to Px
Display the distance between the reference point
and Px, and the distance between P (x-1) and Px
Display the distance
to the Reference
Point