Filter
Top Products
PSF Software Ver.365
12
3 COORD. STAKEOUT
Detailed Operating procedures
Access the COORD. STAKEOUT according to the "1. ACCESSING THE SPECIAL FUNCTIONS".
1. JOB NAME
(1) JOB NAME input
1
Press the [ENT] key to view COORD.
STAKEOUT screen.
COORD.STAKEOUT
2
For example, "XXXX" is inputted.
Press the [ENT] key to view JOB NAME
INPUT screen.
Press the [ENT] key to view JOB NAME
screen.
Input the JOB NAME “XXXX” by pressing
the Alphanumeric keys and arrow key.
JOB NAME INPUT
JOB NAME
3
Press the [ENT] key to enter.
STATION NUMBER LIST
Maximum 15 letters can be inputted on the JOB NAME input.
When the same JOB NAME is already stored, the stored one is displayed after
pressing the [ENT] key at the Operating procedure 3. "The same job name is
found" is displayed.
1. JOB NAME
2. STATION SET UP
3. STAKEOUT
1.
BS CLEAR TO 123
XXXX
1. 000 :