Pentax R-335(N) Home Gym User Manual


 
PSF Software Ver.365
48
12 DataLink DL- 01 Software
DataLink DL01 Software allows you to send collected data by R-300 to other devices, to receive
coordinates data, and to convert the resulting files into a number of common formats.
a) Recommendation for "PN"
It is recommended that "PN" (Point Name) data should consist of less or equal to 4
(one-byte) numeric characters to convert files with DL-01. Because, it may not be converted
properly if alphabetic characters or more than 5 (one-byte) numeric characters are used for
the "PN".
b) Notes for the data transferring.
Please, be careful about following items for the data transfer with "DL-01".
b-1 Notes for unit.
If you are requested to select unit when you convert data on DL-01, please select unit
according to the settings on -300.
b-2 Limitation for each format.
Please, use "CSV" or "DC1( DC-1Z) " format to transfer data to/from -300.
Limitation for the "CSV" format.
With the "CSV" format, "PN" and "PC" (Point Code) data consist of less
or equal to 8 (one-byte) characters can be transferred.
Limitations for the "DC1 (DC-1Z)" format.
With "DC1 (DC-1Z)" format, the length of "PN" data should consist of less
or equal to 8 (one-byte) characters. And with the "DC1 (DC-1Z)" format
"PC" data cannot be transferred.
b-3 Recommended communication settings on R-300.
Recommended settings for “COMMUNICAYTION SETUP” on R-300 special function is as
follows.
R-300BPC(DL-01) for “COORDINATES SEND”
1.BAUD RATE: 1200
2.DATA LENGTH: 8
3.PARITY BITS: NIL
4.STOP BITS: 1
5.SIGNAL CONTROL: OFF
6.XON/XOFF: OFF
R-300BPC(DL-01) for “SURVEY DATA SEND”
1.BAUD RATE: 1200-9600
2.DATA LENGTH: 8
3.PARITY BITS: NIL
4.STOP BITS: 1
5.SIGNAL CONTROL: OFF
6.XON/XOFF: OFF
PC(DL-01) R-300 for “COORDINATES RECEIVE”
1.BAUD RATE: 1200
2.DATA LENGTH: 8
3.PARITY BITS: NIL
4.STOP BITS: 1
5.SIGNAL CONTROL: OFF