Filter
Top Products
7
FIGURE 2
STEP 3:
• SECURELY assemble one SPRING PIN ASSEMBLY (35) to the spring pin barrel on the ROLLER PAD SUPPORT (6). See
FIGURE 3.
• Assemble two ROLLER PADS (11) to the ROLLER PAD SUPPORT (6) using two STARLOCK COLLARS (23).
FIGURE 3
STEP 2:
• SECURELY attach one 1-1/4” SQ. RUBBER BUMPER (24) to the CARRIAGE (5) as shown in FIGURE 2.
• Insert two 3 X 2” GUIDES (21) into the ends of the ROLLER PAD SUPPORT (6) as shown in FIGURE 3.
6
21
35
11
24
5
39
23
• Attach eight 1 X 1” GLIDES (39) to the ends the CARRIAGE (5) as shown in FIGURE 2 using the following steps:
• Thoroughly clean all surfaces where the 1 X 1” GLIDES (39) are to be attached.
• Remove the 1 X 1” GLIDES (39) from the paper backing and firmly apply them to all shown surfaces.