Filter
Top Products
11
STEP 7:
FIGURE 7
• SECURELY assemble three 3-1/2” PULLEYS (14) to the slots in TOP BOOM (4) using three 3/8 X 2-3/4” BOLTS (30), six 3/8”
FLANGE SPACERS (34), and three 3/8” LOCK NUTS (26) as shown in FIGURE 7. (NOTE: Make sure the cable is routed over
all the pulleys.)
• Route the CABLE (12) through the TOP BOOM (4) as shown in FIGURE 7.
12
30 3/8 X 2-3/4”
14
4
34
26
22
• Slide two 5” VINYL CAPS (22) over the lat bar holder bracket on the TOP BOOM (4) as shown in FIGURE 7.