Filter
Top Products
STEP 9:
FIGURE 9
• Securely assemble the ball end of the CABLE (12) and two 3-1/2” PULLEYS (14) to the FRONT UPRIGHT (2) using four 3/8 X
2-3/4” BOLTS (30), four 3/8” FLANGE SPACERS (34), four 3/8” WASHERS (25), and four 3/8” LOCKNUTS (26). (NOTE:
The CABLE (12) should be routed between the pulley and the retaining bolts as shown in FIGURE 9.)
13
2
30 3/8 X 2-3/4”
34
12
14
25
26