Filter
Top Products
10
STEP 6:
FIGURE 6
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
• LOOSELY assemble the TOP BOOM (4) to the FRONT UPRIGHT (2) using one 1/2 X 3” BOLT (32), two 1/2” WASHERS (27),
and one 1/2” LOCK NUT (28). See FIGURE 6.
TIGHTEN!
TIGHTEN!
• SECURELY tighten all connections made to up to this point.
• LOOSELY assemble the TOP BOOM (4) to the REAR UPRIGHT (3) using two 1/2 X 4” BOLTS (33), two 1/2” WASHERS (27),
and one 1/2” LOCK NUT (28). See FIGURE 6. (NOTE: IMPORTANT! Make sure bolts in TOP BOOM are facing as shown
in FIGURE 6.)
32 1/2 X 3”
33 1/2 X 4”
27
28
27
28
3
2
19
30 3/8 X 2-3/4
2
10
25
• SECURELY assemble the SEAT PAD (10) to the FRONT UPRIGHT (2) using two 3/8 X 2-3/4” BOLTS (30) and two 3/8”
WASHERS (25). See FIGURE 6.
4