Filter
Top Products
20
BICYCLE CARE
Basic Maintenance
The following procedures will help you maintain your bicycle for years of enjoyable riding.
For painted frames, dust the surface and remove any loose dirt with a dry cloth. To clean, wipe with a damp cloth
soaked in a mild detergent mixture. Dry with a cloth and polish with car or furniture wax. Use soap and water to clean
plastic parts and rubber tires. Chrome plated bikes should be wiped over with a rust preventative fluid.
Store your bicycle under shelter. Avoid leaving it in the rain or exposed to corrosive materials.
Riding on the beach or in coastal areas exposes your bicycle to salt which is very corrosive. Wash your bicycle
frequently and wipe or spray all unpainted parts with an anti-rust treatment. Make sure wheel rims are dry so braking
performance is not affected. After rain, dry your bicycle and apply anti-rust treatment.
If the hub and bottom bracket bearings of your bicycle have been submerged in water, they should be taken out and
re-greased. This will prevent accelerated bearing deterioration.
If paint has become scratched or chipped to the metal, use touch up paint to prevent rust. Clear nail polish can also be
used as a preventative measure.
Regularly clean and lubricate all moving parts, tighten components and make adjustments as required. (Refer to Parts
4 and 5 of this manual for further details).
The use of alloy components and BED, SATIN and TITANIUM surface treatments minimizes the number of places
where rust can surface.