Filter
Top Products
08
Handlebar Height
Maximum comfort is usually obtained when the handlebar height is
equal to the height of the seat. You may wish to try different heights
to find the most comfortable position.
Threadless headsets and clamp-on stems are not adjustable. Please refer to page 23
for instructions on installation.
The stem’s “Minimum Insertion” mark must not be visible above the top of the headset.
If the stem is extended beyond this mark, the stem may break or damage the fork’s
steerer tube, which could cause you to lose control and fall.
Failure to properly tighten the stem binder bolt, the handlebar binder bolt, or the bar
end extension clamping bolts may compromise steering action, which could cause
you to lose control and fall. Place the front wheel of the bicycle between your legs and
attempt to twist the handlebar/stem assembly using a reasonable amount of force. If
you can twist the stem in relation to the front wheel, turn the handlebars in relation to
the stem, or turn the bar end extensions in relation to the handlebar, you must tighten
the appropriate bolts accordingly.
Stem Wedge Bolt
Maximum Height/
Minimum Insertion
Mark
Handlebar Binder Bolt
Exceeds 2 1/2”
(64mm)