Filter
Top Products
108
F. Clipless (“step-in”) pedals
Clipless pedals (sometimes called “step-in pedals”) are the means most racers use to keep their feet securely in the correct
position for maximum pedaling efficiency. They work like ski bindings ... a plate on the sole of the shoe clicks into a spring-
loaded fixture on the pedal. Clipless pedals require shoes specifically designed for the make and model pedal being used.
Many clipless pedals are designed to allow the rider to adjust the amount of force needed to engage or dis-engage the foot.
WARNING: Clipless pedals are intended for use with shoes specifically made to fit them and are designed to firmly keep the
foot engaged with the pedal. Practice is required to learn to engage and disengage the foot safely. Until engaging and disen-
gaging the foot becomes a reflex action, the technique requires concentration which can distract the rider’s attention, causing
the rider to lose control and fall. Practice engaging and disengaging clipless pedals in a place where there are no obstacles,
hazards or traffic; and be sure that you follow the setup and service instructions and warnings which came with your pedals.
G. Tires and Tubes
1. Tires
Bicycle tires are available in many designs and specifications, ranging from general-purpose designs to tires designed to
perform best under very specific weather or terrain conditions. Your bicycle has been equipped with tires which the bike’s
manufacturer felt were the best balance of performance and value for the use for which the bike was intended. If, once you’ve
gained experience with your new bike, you feel that a different tire might better suit your riding needs, your dealer can help
you select the most appropriate design.
The size, pressure rating, and on some high-performance tires the specific recommended use, are marked on the sidewall of
the tire. The part of this information which is most important to you is Tire Pressure.
WARNING: Never inflate a tire beyond the maximum pressure marked on the tire’s sidewall. Exceeding the recommended
maximum pressure may blow the tire off the rim, which could cause damage to the bike and injury to the rider and bystanders.
The best way to inflate a bicycle tire to the correct pressure is with a bicycle pump.
CAUTION: Gas station air hoses move a large volume of air very rapidly, and will raise the pressure in your tire very rapidly.
To avoid overinflation when using a gas station air hose, put air into your tire in short, spaced bursts.
?