Filter
Top Products
8
7. Press a 26mm x 76mm Inner Cap (74) into the
top of the Left Upright (20).
Attach the Left Upright (20) to the Rear Base (2)
with the four M10 x 67mm Bolts (87) and four
M10 Nylon Locknuts (93). Do not tighten the
Locknuts yet.
7
74
20
93
87
87
93
2
8. Press two Weight Guide Bushings (57) into the
Rear Base (2).
Set the two Weight Guides (27) in the indicated
holes in the Rear Base (2).
Slide two M8 x 90mm Bolts (90) through two M8
Large Washers (53), two 15mm x 30mm Spacers
(23), the Rear Base (2), the Weight Guides (27),
and two more 15mm x 30mm Spacers.
8
27
2
57
23
23
23
53
90