Filter
Top Products
18
43. Wrap the Rear Cable (103) around a 115mm
Pulley (54). Attach the Pulley and a Cable Trap
(52) to the bottom set of holes in the indicated
pair of Pulley Plates (35) with an M10 x 50mm
Bolt (77) and an M10 Nylon Locknut (93). Be
sure the Cable Trap is turned to hold the
Cable in the groove of the Pulley.
45. Wrap the Rear Cable (103) around a 115mm
Pulley (54). Attach the Pulley to the indicated
bracket on the Rear Base (2) with an M10 x
45mm Bolt (86) and an M10 Nylon Locknut (93).
46. Wrap the Rear Cable (103) around a 115mm
Pulley (54). Attach the Pulley to the indicated
bracket on the Rear Top Frame (19) with an M10
x 45mm Bolt (86) and an M10 Nylon Locknut
(93).
44. Wrap the Rear Cable (103) around a 115mm
Pulley (54). Attach the Pulley to the indicated
bracket on the Press Base (1) with an M10 x
45mm Bolt (86) and an M10 Nylon Locknut (93).
43
44
45
46
35
77
52
54
93
103
93
54
1
86
2
93
103
54
86
103
54
86
93
19
103